|
Post by versamax on Apr 30, 2021 5:22:47 GMT -8
I'm looking for a data cable for GE VERSAMAX FANUC IC200UDR005-BD a 15 male pin serial cable plc side to a 9 pin male serial connector to hook up to computer for programming I have versapro software.
|
|
|
Post by Admin on Apr 30, 2021 6:25:00 GMT -8
|
|
|
Post by versamax on May 4, 2021 9:00:48 GMT -8
|
|
|
Post by Admin on May 4, 2021 10:02:03 GMT -8
That is what I thought too, USB would be better than 9pin, as laptops nowadays do not come with 9pin. But like I said before and will say again if you are not sure go to plccable.com, (Not EBay), use the contact form on his site, and confirm you have the correct cable before purchasing. About the adapter, if you need one, you picked the wrong cable or wrong port on your computer. (The 9pin serial port on a computer will be male, the correct 9pin cable will be female, so no adapter should be needed.) So contact Mark at www.plccable.com/plc-communication-support/ and be sure first before ordering.
|
|
|
Post by versamax on May 5, 2021 5:48:27 GMT -8
THANK YOU FOR ALL YOUR HELP AND KNOWLEDGE IM GOING TO WRITE PLC CABLE.COM THANKS AGAIN.
|
|