|
Post by mohsinjahan on Sept 1, 2018 3:55:35 GMT -8
I am trying to connect a Kinco HMI (T070) with the PLC of Mitsubishi (fx1s) but I want to know how can I add PLC tags to HMI Buttons (when I will touch on button on HMI, PLC switch X0 should be energized). Can anybody here help me?
|
|
|
Post by Admin on Sept 1, 2018 6:48:53 GMT -8
If you are using Mitsubishi's "MAPS 4", see lesson 5 of their training manual "Scanning Values from a PLC". If you don't have the MAPS_4_Training_Manual_(Basic).pdf you can get it from gb3a.mitsubishielectric.com/fa/en/mymitsubishi/download_manager?id=12987 (or search for it on their site.) Note: The PLC that is used in there example is the Q series Q03UDE, but the fundamentals of communication will be similar. It is assumed that the user has access to GX Works2 in their example, and a basic familiarity with that software.
|
|